PKYMQOZO(---BRLTTY Navigator 20/40 Help Screen---1"L-" means left keypad and "R-" mean right keypadD  (as in "Rdn" which means the "down" button from the right keypad).I"dn" means down, "rt" is right, "lt" is left, "rn" for the round buttons./"+" means keys are combined (pressed together).	Movement:"  Left/right one window: Rlt / Rrt  One line up/down: Rup / Rdn  Goto cursor: RrnK  Goto previous reading position (before cursor tracking moved us): Rrn+Lup-  Cursor tracking (link/unlink): Lrn (toggle)"  Goto top left of screen: RUP+RLT%  Goto bottom left of screen: RDN+RLT5  Previous/next non-identical line: Rrn+Rup / Rrn+RdnA  Previous/next line with different attributes: Lrn+Rup / Lrn+Rdn-  One character left/right: Lrn+Llt / Lrn+Lrt*  Beginning/end of line: Lup+Llt / Lup+Lrt+  Half-window left/right: Lup+Llt / Lup+Lrt*  Several lines up/down: Lrn+Rup / Lrn+Rdn"Simulation of keyboard arrow keys:-  up/dn / left/right arrow: Lup/Ldn / Llt/Lrt
Special modes  This help: Llt+Lrt (toggle)6  Key describer (learn mode): Llt+Lrt+Lup+Ldn (toggle)*  Freeze/unfreeze screen: Lrn+Rrn (toggle);  Attribute underlining on/off: Lup+Ldn or Ldn+Rup (toggle)E  Show attribute representations: Lup+Ldn+Lrn or Ldn+Rup+Lrn (toggle)(  Info mode: Rup+Rdn or Lup+Rdn (toggle)Cursor routing:3  Route cursor to anywhere on current line: Ldn+Rdn0  Route cursor to cell 1 of display: Ldn+Rdn+Rlt2  Route cursor towards end of display: Ldn+Rdn+RrtCut & paste:1  Mark start of cut regoin at first cell: Rrn+Llt5  Mark start of cut regoin for appending: Rrn+Llt+RupI  Mark end (bottom right) of rectangular cut region at last cell: Rrn+Lrt9  Mark end of linear cut region at last cell: Rrn+Lrt+Rup?  Virtual cursor mode for specifying region to cut: Rrn+Llt+Lrt    In this mode:&    Quit and cancel: Rrn+Llt+Lrt againG    Cut commands now act on cursor position instead of first/last cell.-    Move virtual cursor left/right: Rlt / Rrt/    Move cursor left/right by 5cells: Rup / Rdn    ... By 10cells: Lup / Ldn6    Bring virtual cursor to first/last cell: Llt / Lrt  Paste cut region: Rrn+LdnSpeech:  Speak line: Rrt+Rdn2  Speak from here to bottom of screen: Rlt+Rrt+Rdn  Stop speaking: Rrt+Rup"  Goto speech position: Rrn + +RrtPreferences:  Preferences menu:;    Enter/exit preferences menu: Rlt+Rrt (sort of a toggle)      In the menu:;      Previous/next setting option for this item: Llt / Lrt(      Previous/next menu item: Rup / Rdn!    Save preferences: Rlt+Rrt+Rrn%    Load preferences: Rlt+Rrt+Rrn+Lrn7  Various options can be controlled directly (hotkeys):<    Skip identical lines (on/off): Rlt+Rrt +Rrn+Rdn (toggle)?    Skip blank end-of-lines (on/off): Rlt+Rrt +Lrn+Rdn (toggle):    Sliding braille window (on/off): Rlt+Rrt +Llt (toggle);    Audio tones (enable/disable): Rlt+Rrt +Llt+Lrn (toggle)+    Show/hide cursor: Rlt+Rrt +Lup (toggle)1    Six dots mode (toggle): Rlt+Rrt +Ldn (toggle)7    Cursor blinking (on/off): Rlt+Rrt +Lup+Lrn (toggle)=    Blink capital letters (on/off): Rlt+Rrt +Ldn+Lrn (toggle)G    Attribute underlining (on/off): treated in section on special modes;    Attribute underlining blinks (on/off): Rlt+Rrt +Lrt+Lrn"      or Rlt+Rrt +Lrn+Rup (toggle)-----End of help screen-----%---BRLTTY Navigator 80 Help Screen---&"c-" means cursor, "d-" means display.-"dn" means down, "rt" is right, "lt" is left.Thus:>cLt cRt cUp cDn: those are the center left/right/up/down keys. dLt dRt: are the extremity keys..dUp dDn: the second keys from the extremities.#"Lx" is the square key left of cLt.$"Rx" is the square key right of cRt.8"CR#" means cursor routing key (sensor switch) number #./"+" means keys are combined (pressed together).	Movement:  One line up/down: dUp / dDn  Goto cursor: RxJ  Goto previous reading position (before cursor tracking moved us): Rx+Cup,  Cursor tracking (link/unlink): Lx (toggle)"  Goto top left of screen: dUp+dLt%  Goto bottom left of screen: dDn+dLt3  Previous/next non-identical line: Rx+dUp / Rx+dDn?  Previous/next line with different attributes: Lx+dUp / Lx+dDnB  One character left/right: CR1+CR2 / CR79+CR80 or Lx+cLt / Lx+cRt  Move right # chars: CR# +cUpG  Left/right one window (useful if line longer than 80chars): dLt / dRt*  Beginning/end of line: cUp+dLt / cUp+dRtB  Half-window left/right: CR1+CR3 / CR78+CR80 or cUp+cLt / cUp+cRt(  Several lines up/down: Lx+dUp / Lx+dDnM  Prev/next paragraph (line after blank lines): CR1+CR2 + dUp / CR1+CR2 + dDn?  Prev/next line indented no more than #: CR# + dUp / CR# + dDn/  Remember current position as mark #: CR# + Lx  Goto mark #: CR# + Rx"Simulation of keyboard arrow keys:-  Up/dn / left/right arrow: cUp/cDn / cLt/cRt$  Switch virtual terminal: CR# + cDn
Special modes)  This help: CR1+CR80 or cLt+cRt (toggle)K  Key describer (learn mode): CR1+CR2+CR79+CR80 or cLt+cRt+cUp+cDn (toggle)(  Freeze/unfreeze screen: Lx+Rx (toggle);  Attribute underlining on/off: cUp+cDn or cDn+dUp (toggle)C  Show attribute representations: cUp+cDn+Lx or cDn+dUp+Lx (toggle)(  Info mode: dUp+dDn or cUp+dDn (toggle)7  Attribute info for a char: CR#+cUp+cDn or CR#+cDn+dUpCursor routing:3  Route cursor to anywhere on current line: cDn+dDn  Route cursor to cell #: CR#Cut & paste:-  Mark start of cut region at cell #: CR#+dRtD  Mark start of cut region for appending at cell #: CR#+CR(#+1) +dRtF  Mark end (bottom right) of rectangular cut region at cell #: dLt+CR#<  Mark end of linear cut region at cell #: dLt + CR#+CR(#-1)I  Mark whole region (on one display) starting at cell #(n1) and ending at-    cell #(n2): CR#(n1) + CR#(n1+2) + CR#(n2)A    For example, a region from cell 10 to cell 20: CR10+CR12+CR20%  Paste cut region: CR2+CR3 or Rx+cDnK  Prev/next prompt (same prompt as current line): CR2+CR3+dUp / CR2+CR3+dDnF  Search for same text as in content buffer: CR1+CR3+dUp / CR1+CR3+dDnSpeech:  Speak line: dRt+dDn2  Speak from here to bottom of screen: dLt+dRt+dDn  Stop speaking: dRt+dUp   Goto speech position: Rx + dRtPreferences:  Preferences menu:;    Enter/exit preferences menu: dLt+dRt (sort of a toggle)      In the menu:;      Previous/next setting option for this item: cLt / cRt(      Previous/next menu item: dUp / dDn     Save preferences: dLt+dRt+Rx#    Load preferences: dLt+dRt+Rx+Lx7  Various options can be controlled directly (hotkeys):;    Skip identical lines (on/off): dLt+dRt +Rx+dDn (toggle)>    Skip blank end-of-lines (on/off): dLt+dRt +Lx+dDn (toggle):    Sliding braille window (on/off): dLt+dRt +cLt (toggle):    Audio tones (enable/disable): dLt+dRt +cLt+Lx (toggle)+    Show/hide cursor: dLt+dRt +cUp (toggle)1    Six dots mode (toggle): dLt+dRt +cDn (toggle)6    Cursor blinking (on/off): dLt+dRt +cUp+Lx (toggle)<    Blink capital letters (on/off): dLt+dRt +cDn+Lx (toggle)G    Attribute underlining (on/off): treated in section on special modes:    Attribute underlining blinks (on/off): dLt+dRt +cRt+Lx!      or dLt+dRt +Lx+dUp (toggle)-----End of help screen-----(---BRLTTY PowerBraille 40 Help Screen---L"Lup" / "Ldn" means left rocker up/down. "Rup" / "Rdn" for the right rocker.="lt" is the left top square button, "rt" is the right button.H"cnvx" and "cncv" are the two front middle buttons (convex and concave).8"CR#" means cursor routing key (sensor switch) number #./"+" means keys are combined (pressed together).	Movement:   Left/right one window: lt / rt  One line up/down: Rup / Rdn  Goto cursor: cncvL  Goto previous reading position (before cursor tracking moved us): cncv+Lup.  Cursor tracking (link/unlink): cnvx (toggle)!  Goto top left of screen: Rup+lt$  Goto bottom left of screen: Rdn+lt7  Previous/next non-identical line: cncv+Rup / cncv+RdnC  Previous/next line with different attributes: cnvx+Rup / cnvx+Rdn/  One character left/right: CR1+CR2 / CR39+CR40  Move right # chars: CR# +Rup(  Beginning/end of line: Lup+lt / Lup+rt-  Half-window left/right: CR1+CR3 / CR38+CR40,  Several lines up/down: cnvx+Lup / cnvx+LdnM  Prev/next paragraph (line after blank lines): CR1+CR2 + Rup / CR1+CR2 + Rdn?  Prev/next line indented no more than #: CR# + Rup / CR# + Rdn1  Remember current position as mark #: CR# + cnvx  Goto mark #: CR# + cncv"Simulation of keyboard arrow keys:  Up/dn arrow : Lup/Ldn$  Switch virtual terminal: CR# + Ldn
Special modes  This help: CR1+CR40/  Key describer (learn mode): CR1+CR2+CR79+CR40,  Freeze/unfreeze screen: cnvx+cncv (toggle)0  Attribute underlining on/off: Ldn+Rup (toggle)7  Show attribute representations: Ldn+Rup+cnvx (toggle)  Info mode: Lup+Rdn (toggle)(  Attribute info for a char: CR#+Ldn+RupCursor routing:3  Route cursor to anywhere on current line: Ldn+Rdn  Route cursor to cell #: CR#Cut & paste:,  Mark start of cut region at cell #: CR#+rtA  Mark start of cut region for append at cell #: CR#+CR(#+1) + rtE  Mark end (bottom right) of rectangular cut region at cell #: lt+CR#;  Mark end of linear cut region at cell #: lt + CR#+CR(#-1)I  Mark whole region (on one display) starting at cell #(n1) and ending at-    cell #(n2): CR#(n1) + CR#(n1+2) + CR#(n2)A    For example, a region from cell 10 to cell 20: CR10+CR12+CR20'  Paste cut region: CR2+CR3 or cncv+LdnK  Prev/next prompt (same prompt as current line): CR2+CR3+Rup / CR2+CR3+RdnF  Search for same text as in content buffer: CR1+CR3+Rup / CR1+CR3+RdnSpeech:  Speak line: rt+Rdn0  Speak from here to bottom of screen: lt+rt+Rdn  Stop speaking: rt+Rup!  Goto speech position: cncv + rtPreferences:  Preferences menu:9    Enter/exit preferences menu: lt+rt (sort of a toggle)      In the menu:O      Prev/next setting for this item: Lup / Ldn or cnvx / cncv or routing keys(      Previous/next menu item: Rup / Rdn     Save preferences: lt+rt+cncv%    Load preferences: lt+rt+cncv+cnvx7  Various options can be controlled directly (hotkeys):;    Skip identical lines (on/off): lt+rt +cncv+Rdn (toggle)>    Skip blank end-of-lines (on/off): lt+rt +cnvx+Rdn (toggle))    Show/hide cursor: lt+rt +Lup (toggle)/    Six dots mode (toggle): lt+rt +Ldn (toggle)6    Cursor blinking (on/off): lt+rt +Lup+cnvx (toggle)<    Blink capital letters (on/off): lt+rt +Ldn+cnvx (toggle)G    Attribute underlining (on/off): treated in section on special modesC    Attribute underlining blinks (on/off): lt+rt +cnvx+Rup (toggle)-----End of help screen-----+---BRLTTY PowerBraille 65/80 Help Screen---L"Lup" / "Ldn" means left rocker up/down. "Rup" / "Rdn" for the right rocker.L"but1" and "but2" are the two top square buttons on the left of the display,'  "But3" and "But4" those on the right.K"bar1", "bar2", "bar3" and "bar4" are the four bars just above the brailole%  cells, numbered from left to right.4  "bar234" means anyone of "bar2", "bar3" or "bar4".H"cnvx" and "cncv" are the two front middle buttons (convex and concave).G"SW1" and "SW2" are the two front switches on the left, "SW3" and "SW4"  those on the right.8"CR#" means cursor routing key (sensor switch) number #.7CR81 is not used. "last cell" always refers to cell 80./"+" means keys are combined (pressed together).	Movement:.  One line up/down: Rup / Rdn or bar1 / bar234  Goto cursor: cncvL  Goto previous reading position (before cursor tracking moved us): cncv+Lup.  Cursor tracking (link/unlink): cnvx (toggle)$  Goto top left of screen: but1+bar1'  Goto bottom left of screen: but1+bar2;  Previous/next non-identical line: but2+bar1 / but2+bar234C  Previous/next line with different attributes: but2+Rup / but2+Rdn/  One character left/right: CR1+CR2 / CR79+CR80  Move right # chars: CR# +RupI  Left/right one window (useful if line longer than 80chars): but3 / but4,  Beginning/end of line: Lup+but3 / Lup+but4-  Half-window left/right: CR1+CR3 / CR78+CR808  Several lines up/down: but1+but2+bar1 / but1+but2+bar2M  Prev/next paragraph (line after blank lines): CR1+CR2 + Rup / CR1+CR2 + Rdn?  Prev/next line indented no more than #: CR# + Rup / CR# + Rdn1  Remember current position as mark #: CR# + cnvx  Goto mark #: CR# + cncv"Simulation of keyboard arrow keys:/  Up/dn / left/right arrow: Lup/Ldn / but1/but2$  Switch virtual terminal: CR# + Ldn
Special modes+  This help: CR1+CR80 or but1+but2 (toggle)O  Key describer (learn mode): CR1+CR2+CR79+CR80 or but1+but2+but3+but4 (toggle)&  Freeze/unfreeze screen: SW2 (toggle),  Attribute underlining on/off: SW1 (toggle).  Show attribute representations: SW4 (toggle)  Info mode: but3+but4 (toggle)(  Attribute info for a char: CR#+Ldn+RupCursor routing:3  Route cursor to anywhere on current line: Ldn+Rdn  Route cursor to cell #: CR#Cut & paste:.  Mark start of cut region at cell #: CR#+but3C  Mark start of cut region for append at cell #: CR#+CR(#+1) + but3G  Mark end (bottom right) of rectangular cut region at cell #: but2+CR#=  Mark end of linear cut region at cell #: but2 + CR#+CR(#-1)I  Mark whole region (on one display) starting at cell #(n1) and ending at-    cell #(n2): CR#(n1) + CR#(n1+2) + CR#(n2)A    For example, a region from cell 10 to cell 20: CR10+CR12+CR20  Paste cut region: CR2+CR3K  Prev/next prompt (same prompt as current line): CR2+CR3+Rup / CR2+CR3+RdnF  Search for same text as in content buffer: CR1+CR2+Rup / CR1+CR3+RdnSpeech:  Speak line: bar2+Rdn4  Speak from here to bottom of screen: bar1+bar2+Rdn  Stop speaking: bar2+Rup#  Goto speech position: cncv + bar2Preferences:  Preferences menu:=    Enter/exit preferences menu: bar1+bar2 (sort of a toggle)      In the menu:=      Previous/next setting option for this item: but1 / but2*      Previous/next menu item: bar1 / bar2$    Save preferences: bar1+bar2+cncv)    Load preferences: bar1+bar2+cncv+cnvx7  Various options can be controlled directly (hotkeys):/    Skip identical lines (on/off): SW3 (toggle)8    Skip blank end-of-lines (on/off): bar2 +SW3 (toggle):    Audio tones (enable/disable): bar1+bar2 +but2 (toggle).    Show/hide cursor: bar1+bar2 +but1 (toggle)3    Six dots mode (toggle): bar1+bar2 +Ldn (toggle);    Cursor blinking (on/off): bar1+bar2 +but1+cnvx (toggle)A    Blink capital letters (on/off): bar1+bar2 +but2+cnvx (toggle)G    Attribute underlining (on/off): treated in section on special modes>    Attribute underlining blinks (on/off): bar1+bar2 +SW1+cnvx      or just SW1+cnvx (toggle)-----End of help screen-----